Cyclades PathRouter-Frame-Relay
 1-Configure Interface     2-Configure Hosts         3-Telnet
 4-Reboot                  5-Configure Users         6-Router Management
 7-Logout                  8-Ping                    9-Configure Dial-Out
10-Traceroute

Select option ==> 1

1-Ethernet                2-Link 1                  3-High Speed Async
4-Multilink Circuits

Select option ==> 2

1-X.25                    2-PPP                     3-Frame Relay
4-HDLC                    5-Inactive

Select option ==> 3

Link 1                    : Frame Relay Active
IP address                : 192.168.64.2
Subnet mask               : 255.255.255.252
Send   RIP                : RIP2 (RIP1 compat)
Listen RIP                : Both
RIP-2 Authentication      : Inactive
NAT direction             : Outside
SNAP IP                   : Inactive
LMI type                  : ANSI (ANNEX D)
T391 (seconds)            : 10
N391                      : 6
N392                      : 3
N393                      : 4
Number of DLCIs           : 1
Clock source              : External
Bandwidth                 : 64K bps

   Frame Relay MAP
---------------------------------------
 #  IP address       DLCI  Inverse ARP
---------------------------------------
01. 192.168.64.1       61  Inactive
---------------------------------------                                                
IP
3.237.16.210