[Pioneira] Switch Dell S3100

Criar a VLAN 612 da filial Terminal Santa Maria Sul no switch Dell S3100:

Dell#configure
Dell(conf)#interface vlan 612
Dell(conf-if-vl-612)#tagged port-channel 1
Dell(conf-if-vl-612)#tagged port-channel 2
Dell(conf-if-vl-612)#tagged gigabitethernet 1/21
Dell(conf-if-vl-612)#tagged gigabitethernet 2/21
Dell(conf-if-vl-612)#no shutdown
Dell(conf-if-vl-612)#exit
Dell(conf)#exit

Criar as Link Aggregations 13, portas 1/13 e 2/13, e 14, portas 1/14 e 2/14:

Dell#configure
Dell(conf)#interface gigabitethernet 1/13
Dell(conf-if-gi-1/13)#exit
Dell(conf)#interface port-channel 13
Dell(conf-if-po-13)#portmode hybrid
Dell(conf-if-po-13)#switchport
Dell(conf-if-po-13)#exit
Dell(conf)#interface port-channel 14
Dell(conf-if-po-14)#portmode hybrid
Dell(conf-if-po-14)#switchport
Dell(conf-if-po-14)#exit
Dell(conf)#interface gigabitethernet 1/13
Dell(conf-if-gi-1/13)#no switchport
Dell(conf-if-gi-1/13)#port-channel-protocol lacp
Dell(conf-if-gi-1/13-lacp)#port-channel 13 mode active
Dell(conf-if-gi-1/13-lacp)#exit
Dell(conf-if-gi-1/13)#exit
Dell(conf)#interface gigabitethernet 1/14
Dell(conf-if-gi-1/14)#no switchport
Dell(conf-if-gi-1/14)#port-channel-protocol lacp
Dell(conf-if-gi-1/14-lacp)#port-channel 14 mode active
Dell(conf-if-gi-1/14-lacp)#exit
Dell(conf-if-gi-1/14)#exit
Dell(conf)#interface gigabitethernet 2/13
Dell(conf-if-gi-2/13)#no switchport
Dell(conf-if-gi-2/13)#port-channel-protocol lacp
Dell(conf-if-gi-2/13-lacp)#port-channel 13 mode active
Dell(conf-if-gi-2/13-lacp)#exit
Dell(conf-if-gi-2/13)#exit
Dell(conf)#interface gigabitethernet 2/14
Dell(conf-if-gi-2/14)#no switchport
Dell(conf-if-gi-2/14)#port-channel-protocol lacp
Dell(conf-if-gi-2/14-lacp)#port-channel 14 mode active
Dell(conf-if-gi-2/14-lacp)#exit
Dell(conf-if-gi-2/14)#exit
Dell(conf)#exit
Dell#configure
Dell(conf)#interface port-channel 13
Dell(conf-if-po-13)#no shutdown
Dell(conf-if-po-13)#exit
Dell(conf)#interface port-channel 14
Dell(conf-if-po-14)#no shutdown
Dell(conf-if-po-14)#exit
Dell(conf)#exit
Dell#copy running-config startup-config
File with same name already exist.
Proceed to copy the file [confirm yes/no]: yes
!
11158 bytes successfully copied
Synchronizing data to peer stack-unit
!!!!!!!!!!!!!!!!!!!</pre>

IP
3.235.179.111